Parker 590+ DC DRIVE จำหน่ายและบริการติดตั้งทั่วประเทศ
DC590+ Integrator
The Integrator series is a single family of both AC drives (AC690+) and DC drives (DC590+) that provides the benefits of common programming, set-up and communication across both technologies.
The DC590+ Integrator series highly advanced DC drive meets the demands of the most complex motor control applications.
Extensive application software (including winder control as standard) together with Function Block Programming and configurable I/O creates a total drive system in a single module.
Options
- Programmable Keypad 6901
- Technology Box for Communications (Profibus-DP, DeviceNet, CANopen, LINK, LonWorks, EI Bisynch/RS422/RS485, Modbus RTU)
- Speed Feedback Technology Box (analogue Tachometer, encoder microtach for acrylic F.O., microtach for glass F.O.)
- EMC Filter - Industrial Ambience
- Line Reactors for European and North American markets (UL-CSA)
- Line Inductors for long motor leads
- 598+ and 599+ Stack Controller configuration available for retrofit of existing power stacks
Features & Advantages
- Extremely simple set-up and programming
- Removable Key Pad
- Extremely Compact
- Motor Thermistor Input
- Macro Function Blocks
- Open-loop winder control
- Winder control - loadcell/dancer
- Section control
- Math functions
- Embedded controller functions
Standards
The DC590+ Series DC drives listed on this page meet the following standards when installed in accordance with the relevant product manual:
EMC Compatibility: CE Marked in accordance with 2004/108/EC (EMC Directive)
Europe: This product conforms with the Low Voltage Directive 2006/95/EC
Safety: EN61800-5/2003 (when fitted inside a cubicle)
North America/Canada: Complies with the requirements of UL508C and CSA22.2 #14 as an open-type drive (only applicable to frame sizes 1-4)
Overvoltage Category: Overvoltage Category III (3-phase supply) / Overvoltage Category II (auxiliary supply)
Pollution Degree: II (non-conductive pollution, except for temporary condensation) for control electronics
Technical Specifications
Power Supply
110-220VAC ±10%, 50-60 Hz ±5%
220-500VAC ±10%, 50-60 Hz ±5%
500-690VAC ±10%, 50-60 Hz ±5%
220-500VAC ±10%, 50-60 Hz ±5%
500-690VAC ±10%, 50-60 Hz ±5%
Output Armature Current Ratings
15 - 2700A (15 - 165A for DRV Versions)
Overload
for 15 to 270A drives: 150% for 30 sec / 200% for 10 sec
for drives above 270A: refer to catalog or manual for details
for drives above 270A: refer to catalog or manual for details
Environment
for 15 to 165A drives: 0-45°C / 32-113°F
for 180 to 270A drives: 0-35°C / 32-95°F
for 380 to 2700A drives: 0-40°C / 32-104°F
Up to 500m ASL (derate 1% per 200m up to 5000m maximum)
for 180 to 270A drives: 0-35°C / 32-95°F
for 380 to 2700A drives: 0-40°C / 32-104°F
Up to 500m ASL (derate 1% per 200m up to 5000m maximum)
Protection
IP00 / IP20 on frame size 1 (15-35A) drives only [Europe]
UL Open Type [North America/Canada]
UL Open Type [North America/Canada]
Speed Feedback
Armature Voltage Feedback
Tach Generator
Encoder
Optical Fiber Microtach encoder
Tach Generator
Encoder
Optical Fiber Microtach encoder
Analog Inputs
5 Total: 1 x 12 bit (plus sign), 4 x 10 bit (plus sign)
1x Speed Demand Setpoint (-10/0/+10V) / 4x Configurable
1x Speed Demand Setpoint (-10/0/+10V) / 4x Configurable
Analog Outputs
3 Total: 10 bit
1x Armature Current Output (-10/0/+10V or 0-10V) / 2x Configurable
1x Armature Current Output (-10/0/+10V or 0-10V) / 2x Configurable
Digital Inputs
9 Total: 24VDC (max 15mA)
1x Program Stop / 1x Coast Stop / 1x External Stop / 1x Start-Run / 5x Configurable
1x Program Stop / 1x Coast Stop / 1x External Stop / 1x Start-Run / 5x Configurable
Digital Outputs
3 Total: 24VDC / 100mA (short circuit protected)
3x Configurable
3x Configurable
Reference Supplies
+10VDC / -10VDC / +24VDC
Power Bridge
590+ - 4 Quadrant Regenerative: Dual Three Phase SCR bridges
591+ - 2 Quadrant Non-Regenerative: Single SCR bridge
Variable Field Control with SCR's
591+ - 2 Quadrant Non-Regenerative: Single SCR bridge
Variable Field Control with SCR's
Drive Protection
High energy MOV's
Heatsink overtemperature
Instantaneous overcurrent
Thyristor trigger failure
Inverse time overcurrent
Interline snubber network
Field Failure
Zero speed detection
Speed feedback failure
Stall protection
Motor overtemperature
Heatsink overtemperature
Instantaneous overcurrent
Thyristor trigger failure
Inverse time overcurrent
Interline snubber network
Field Failure
Zero speed detection
Speed feedback failure
Stall protection
Motor overtemperature
Model List (DC590P / 591P)
| 590P Series | 591P Series |
|---|---|
| 590P-23215010-P00-U4V0 | 591P-23270020-P00-U4V0 |
| 590P-23235010-P00-U4V0 | 591P-23350041-P00-U4V0 |
| 590P-23240020-P00-U4V0 | 591P-53215010-P00-U4V0 |
| 590P-23270020-P00-U4V0 | 591P-53235010-P00-U4V0 |
| 590P-23311020-P00-U4V0 | 591P-53240020-P00-U4V0 |
| 590P-23316520-P00-U4V0 | 591P-53270020-P00-U4V0 |
| 590P-23318032-P00-U4V0 | 591P-53270020-P83-U4V0 |
| 590P-23327032-P00-U4V0 | 591P-53311020-P00-U4V0 |
| 590P-53215010-P00-U4V0 | 591P-53316520-P00-U4V0 |
| 590P-53235010-P00-U4V0 | 591P-53318031-P00-U4V0 |
| 590P-53235010-P00-U4V0 | 591P-53327031-P00-U4V0 |
| 590P-53240020-P00-U4V0 | 591P-53327032-P00-U4V0 |
| 590P-53270020-P00-U4V0 | 591P-53327032-P41-U4V0 |
| 590P-53311020-P00-U4V0 | 591P-53338041-P00-U4V0 |
| 590P-53316520-P00-U4V0 | 591P-53338042-P00-U4V0 |
| 590P-53318031-P00-U4V0 | 591P-53350041-P00-U4V0 |
| 590P-53327031-P00-U4V0 | 591P-53350042-P00-U4V0 |
| 590P-53327031-P41-U4V0 | 591P-53372541-P00-U4V0 |
| 590P-53327032-P00-U4V0 | 591P-53372542-P00-U4V0 |
| 590P-53338041-P00-U4V0 | 591P-53383041-P00-U4V0 |
| 590P-53338042-P00-U4V0 | 591P-53383042-P00-U4V0 |
| 590P-53350041-P00-U4V0 | |
| 590P-53350042-P00-U4V0 | |
| 590P-53372541-P00-U4V0 | |
| 590P-53372542-P00-U4V0 | |
| 590P-53383041-P00-U4V0 | |
| 590P-53383042-P00-U4V0 | |
| 590P-53412560-P00-U4V0 |
สนใจบริการ หรือ ต้องการใบเสนอราคา?
ทีมวิศวกรพร้อมให้คำปรึกษาและดูหน้างานจริง
ติดต่อสอบถาม / ขอใบเสนอราคา
